- Audioengine D1 Driver
- Audioengine D1 Driver Windows 10
- Audioengine D1 Driver Mac
- Audioengine D1 Driver Windows 10
- Audioengine D1 Asio Driver
DAC type
USB and Optical
The Audioengine D1 is a USB-powered DAC, which makes it truly portable, combined with a headphone amplifier, which makes it even more so. What's more, as well as accepting a signal through the USB input, it also offers the option of an optical connection, which also has the benefit of accepting content of up to 192kHz/24-bit, rather than the.
Inputs
USB audio
SPDIF Optical
D/A converter
AKM4396
USB transfer mode
Asynchronous dual clock
USB controller
TI1020B
USB device class
Type 1.1 or above
Input bit depth
16 bit, 24 bit
Input sample rate (USB)
32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz
Input sample rate (optical)
32kHz-192kHz native playback
Outputs
Analog RCA L/R stereo
Analog 3.5mm mini-jack stereo
Full-scale output level
2.0V RMS
Output impedance
2 ohms
Recommended headphone impedance range
10 ohms to 600 ohms
Headphone amplifier
OPA2134
Optical receiver
CS8416
Frequency response
10Hz-25KHz (+/- 0.5dB)
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) <0.0025%
Crosstalk
-85db
Input bit depth
16 bit, 24 bit
Input sample rate (USB)
32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz
Input sample rate (optical)
32kHz-192kHz native playback
Power requirement
USB 5V DC, 200mA
USB power filtering
2-stage redundant regulation
Audioengine D1 Driver
Product dimensions
3.5×3.75×1″ (89x95x25mm)
Shipping weight
1.0lbs (0.5kg)
Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing
Included accessories
USB cable, 2ft
Setup guide
Microfiber bag
D1 Internal Converter
The D1 uses the AK4396 DAC, which is well-regarded for its low noise and high fidelity. Due to the high signal-to-noise specs of the AK4396 and the added benefit of double redundancy power source conversion and filtering, the D1 presents impressive low noise and low distortion characteristics. The D1 can process digital audio at any bit depth up to 24-bits and any sample rate up to 192kHz.
D1 Headphone Amplifier
The D1 includes a headphone amp based on the TI OPA2134 low noise opamp. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.
D1 Power
The D1 is powered directly from the USB bus and power is passed through two stages of regulation to ensure no USB bus power variations affect the audio quality.
D1 Volume Control
Volume is controlled directly from the D1 front panel via the digitally-controlled analog potentiometer.
DAC type
USB and Optical
Inputs
USB audio
SPDIF Optical
D/A converter
AKM4396
USB transfer mode
Asynchronous dual clock
USB controller
TI1020B
USB device class
Type 1.1 or above
Input bit depth
16 bit, 24 bit
Input sample rate (USB)
32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz
Input sample rate (optical)
32kHz-192kHz native playback
Outputs
Analog RCA L/R stereo
Analog 3.5mm mini-jack stereo
Full-scale output level
2.0V RMS
Output impedance
2 ohms
Recommended headphone impedance range
10 ohms to 600 ohms
Headphone amplifier
OPA2134
Optical receiver
CS8416
Frequency response
10Hz-25KHz (+/- 0.5dB)
SNR
(DC to 20 kHz) >110dB
Audioengine D1 Driver Windows 10
THD+N
(1kHz FS 96kS/s) <0.0025%
Crosstalk
-85db
Input bit depth
16 bit, 24 bit
Input sample rate (USB)
32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz
Input sample rate (optical)
32kHz-192kHz native playback
Power requirement
USB 5V DC, 200mA
USB power filtering
2-stage redundant regulation
Product dimensions
3.5×3.75×1″ (89x95x25mm)
Shipping weight
1.0lbs (0.5kg)
Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing
Included accessories
USB cable, 2ft
Setup guide
Microfiber bag
D1 Internal Converter
The D1 uses the AK4396 DAC, which is well-regarded for its low noise and high fidelity. Due to the high signal-to-noise specs of the AK4396 and the added benefit of double redundancy power source conversion and filtering, the D1 presents impressive low noise and low distortion characteristics. The D1 can process digital audio at any bit depth up to 24-bits and any sample rate up to 192kHz.
Audioengine D1 Driver Mac
D1 Headphone Amplifier
The D1 includes a headphone amp based on the TI OPA2134 low noise opamp. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.
Audioengine D1 Driver Windows 10
D1 Power
The D1 is powered directly from the USB bus and power is passed through two stages of regulation to ensure no USB bus power variations affect the audio quality.
Audioengine D1 Asio Driver
D1 Volume Control
Volume is controlled directly from the D1 front panel via the digitally-controlled analog potentiometer.